Polycarbonate UV2
Click to begin customisingPALSUN® UV2 polycarbonate sheets benefits from an integral, coextruded layer of UV protection on both sides of the sheet and can therefore be used for external as well as internal applications. Coupled with a service temperature range between -50°C and +100°C, PALSUN® is suitable for use in any environment. With a light transmission of 90%, the same as glass but at half the weight and 200 times the impact resistance, PALSUN® polycarbonate is ideal for use in areas exposed to potential damage or vandalism.
MAXIMUM SHEET SIZE (MM)
3050×2050
THICKNESSES AVAILABLE (MM)
3,4,5,6,8,10
Black 962
Click to begin customisingPERSPEX® acrylic colours are available in solid or opaque, translucent and transparent options. While no light will pass through an opaque colour, translucent colours are partially transparent permitting the passage of light without enabling us to distinguish the colour of objects seen through them.
MAXIMUM SHEET SIZE (MM)
3050×2030
THICKNESSES AVAILABLE (MM)
3, 5mm
Gold Mirror 1300
Click to begin customisingFABBACK acrylic mirror is made from OPTIX continuously processed acrylic sheet. With the process of vacuum metalizing, each sheet is given a mirror finish that is protected by the industry’s toughest, most durable backing. Standard sheet is 2440x1220mm
Please note these sheets are NOT suitable for back illumination without being covered, due to small specs that may show light.
For large applications the sheet must be 100% bonded to a flat smooth surface.
For large applications eg. Wall covering, the sheet must be 100% bonded to a flat smooth surface.
THICKNESSES AVAILABLE (MM)
3mm
Green 6205
Click to begin customisingPERSPEX® acrylic colours are available in solid or opaque, translucent and transparent options. While no light will pass through an opaque colour, translucent colours are partially transparent permitting the passage of light without enabling us to distinguish the colour of objects seen through them.
MAXIMUM SHEET SIZE (MM)
3050×2030
THICKNESSES AVAILABLE (MM)
3, 5mm
K12 Diamond
Click to begin customisingPrismatic extruded acrylic is used exclusively for lenses in lighting applications. The prismatic surface is one of the most established products for the control of glare and diffusion in fluorescent light fittings.
MAXIMUM SHEET SIZE (MM)
2500x1250mm
THICKNESSES AVAILABLE (MM)
3mm
Yellow 229
Click to begin customisingPERSPEX® acrylic colours are available in solid or opaque, translucent and transparent options. While no light will pass through an opaque colour, translucent colours are partially transparent permitting the passage of light without enabling us to distinguish the colour of objects seen through them.
MAXIMUM SHEET SIZE (MM)
3050×2030
THICKNESSES AVAILABLE (MM)
3, 5mm
Orange 363
Click to begin customisingPERSPEX® acrylic colours are available in solid or opaque, translucent and transparent options. While no light will pass through an opaque colour, translucent colours are partially transparent permitting the passage of light without enabling us to distinguish the colour of objects seen through them.
MAXIMUM SHEET SIZE (MM)
3050×2030
THICKNESSES AVAILABLE (MM)
3, 5mm
Opal Frost 030
Click to begin customisingPERSPEX® Frost acrylic has a double-sided matt surface which gives an effect similar to that of sandblasted or etched glass. PERSPEX® Frost acrylic is available in subtle shades from clear and opal to fresh pastel colours, right through the spectrum to deep, warm reds and rich greens and blues.
The frosted texture is retained after thermoforming making the product suitable for a wide range of internal and external applications.
MAXIMUM SHEET SIZE (MM)
3050×2030
THICKNESSES AVAILABLE (MM)
3, 5mm
Opal 030
Click to begin customisingPERSPEX® Opal acrylic is available in a wide range of white tones, where a white colour palette is required or more specifically, for light box applications. The range of light transmission through the opal sheet, up to 67%, receives maximum haze and subsequently offers the maximum light diffraction. This in turn, creates the desired lighting effect for any application.
MAXIMUM SHEET SIZE (MM)
3050X2030
THICKNESSES AVAILABLE (MM)
3,5mm
Blue 750
Click to begin customisingPERSPEX® acrylic colours are available in solid or opaque, translucent and transparent options. While no light will pass through an opaque colour, translucent colours are partially transparent permitting the passage of light without enabling us to distinguish the colour of objects seen through them.
MAXIMUM SHEET SIZE (MM)
3050×2030
THICKNESSES AVAILABLE (MM)
3, 5mm
Desert Beige Frost 5268
Click to begin customisingPERSPEX® Frost acrylic has a double-sided matt surface which gives an effect similar to that of sandblasted or etched glass. PERSPEX® Frost acrylic is available in subtle shades from clear and opal to fresh pastel colours, right through the spectrum to deep, warm reds and rich greens and blues.
The frosted texture is retained after thermoforming making the product suitable for a wide range of internal and external applications.
MAXIMUM SHEET SIZE (MM)
3050×2030
THICKNESSES AVAILABLE (MM)
3mm
Silver Mirror
Click to begin customisingFABBACK acrylic mirror is made from OPTIX continuously processed acrylic sheet. With the process of vacuum metalizing, each sheet is given a mirror finish that is protected by the industry’s toughest, most durable backing.
Standard sheet is 2440x1220mm
Please note these sheets are NOT suitable for back illumination without being covered, due to small specs that may show light.
For large applications eg. Wall covering, the sheet must be 100% bonded to a flat smooth surface.
THICKNESSES AVAILABLE (MM)
3mm
